Carpentry and fit-out

Your trade's documents

Trade SWMS (17)

1. General Carpentry Works
2. Structural Timber Framing
3. Fit Out and Joinery Installation
4. Cutting Sawing Machining
5. Nail Gun Pneumatic Tools
6. Temporary Works Protection
7. Internal Framing
8. Door Installation
9. Fire Door Installation
10. Door Hardware Installation
11. Skirting Installation
12. Architrave Installation
13. Timber Flooring Installation
14. Deck Construction
15. Pergola Construction
16. Balustrade Installation
17. Handrail Installation

High risk construction work SWMS (5)

1. Work at Heights
2. Mobile Scaffold Use
3. Elevated Work Platform Operation
4. Temporary Edge Protection
5. Silica Dust Exposure

Inspection and test plans (6)

1. Structural Timber Framing ITP
2. Internal Framing ITP
3. Joinery & Fit-Out Installation ITP
4. Doors, Frames & Hardware ITP
5. Final Fit-Out Inspection ITP
6. Balustrade and Handrail Installation ITP

In every carpentry and fit-out package

Core site forms and registers (22)

1. Worker Site Induction
2. Contractor / Trade Induction
3. Induction Acknowledgement Declaration
4. Daily Pre-Start and Coordination Record
5. Toolbox Talk Attendance Record
6. Pre-Task Risk Assessment / JSEA
7. Hazard / Near Miss Report
8. Incident & Injury Report
9. First Aid Treatment Record
10. Site Safety Inspection Checklist
11. Plant & Equipment Inspection
12. PPE Inspection Checklist
13. High-Risk Construction Work SWMS Review and Verification Record
14. Trade SWMS Register
15. Training & Competency Register
16. High-Risk Work Licence Register
17. Plant & Equipment Register
18. Test & Tag Register
19. Chemicals & SDS Register
20. Trade ITP Register
21. Non-Conformance Report
22. Fitness for Work Declaration

Defects, NCRs and quality policy (4)

1. Defect Report
2. Defect Rectification Verification
3. NCR Register
4. Quality Policy

Management Lite: policy, competency, workforce and prequalification (9)

1. Occupational Health & Safety Policy
2. Policy Review & Approval Record
3. Competency & Training Needs Analysis
4. IMS Awareness Training Record
5. Worker Consultation Record
6. Verification of Competency (VOC) Assessment
7. Supplier / Subcontractor Evaluation Record
8. Subcontractor Prequalification Questionnaire
9. Supplier and Subcontractor Onboarding Checklist

Environmental Essentials: waste, spills, dust and noise (Light Commercial and Heavy Commercial) (11)

1. Environmental Policy
2. Environmental Emergency Response Arrangements (Spills/Leaks)
3. Erosion & Sediment Control Inspection
4. Noise Monitoring Log
5. Dust Monitoring Log
6. Waste Segregation Inspection
7. Dangerous Goods / Chemical Storage Inspection
8. Waste Transport / Docket Capture Record
9. Waste Management Register
10. Environmental Controls Register (ESCP, noise, dust etc.)
11. Vibration Monitoring Log

Tier 1 safety core (Heavy Commercial) (24)

1. Return to Work Plan
2. Suitable Duties and Suitable Employment Offer Record
3. RTW Case Review Record
4. Pre-Task Risk Assessment / JSEA
5. Isolation / Lockout Tagout Permit
6. Excavation, Penetration and Services Permit
7. Work at Heights Permit and Verification Record
8. Lift Plan and Critical Lift Permit
9. Silica Hazard Control Statement and HRCSW Control Record
10. Respiratory Protection Fit Test and Issue Record
11. Asbestos Discovery and Disturbance Report
12. Emergency Management Plan
13. Permit to Work Procedure
14. Hazardous Chemicals Management Plan
15. Asbestos Management Procedure
16. Crystalline Silica and Respirable Dust Management Procedure
17. Traffic and Mobile Plant Interaction Management Plan
18. Safety Risk Management and Task Risk Assessment Procedure
19. Return to Work Policy
20. Fitness for Work Policy
21. Drug & Alcohol Policy
22. Emergency Wardens / First Aiders Register
23. Asbestos Register
24. Health Monitoring Trigger Register

Tier 1 contractor assurance (Heavy Commercial) (2)

1. Trade and Contractor Compliance Matrix
2. Project Interface Responsibility Matrix

Documents are reviewed against legislative change every 6 months; new revisions are pushed to you.